INF PLUS®
INTERFERENTIAL STIMULATOR
BioMedical Life Systems
www.bmls.com
Overview
BioMedical Life Systems Inc. INF Plus® Interferential Device
utilizes Microprocessor technology, with tolerance levels of less than 1%, this
portable device incorporates a sinusoidal wave form usually found only in large
Clinical Models.
There pre-programmed sweeps; 1-10Hz, used for Edema Reduction, 80 – 150
Hz used for Pain Relief, and 1 – 150 Hz used for Total Treatment allow
for easy set up and patient instruction.
The Device offers Bipolar stimulation using two electrodes where the interferential
stimulation is already
“mixed” or Full interferential stimulation with the use of four electrodes.
The device has a timer for the desired treatment time, and operates on four AA
batteries or an optional wall adaptor.
General Specifications
Size: |
2.75" x 4.5" x 1.5" (6.9cm x 11cm x 3.8cm) |
Weight: |
8.1oz (229 grams) |
Channels: |
Dual |
Waveform: |
Symmetrical sinusoidal biphasic (INF) |
Carrier Frequency: |
4000 Hz, Fixed |
Interference Frequency (adj): |
4001 - 4150 Hz |
Continuous Stimulation (adj.): |
Difference Frequency 1-150 Hz |
Frequency Shifts (3): |
1. 1 - 10 Hz over 6 seconds
2. 80 - 150 Hz over 8 seconds
3. 1 - 150 Hz over 10 seconds |
Output Current: |
0 - 66 Milliamps peak to peak |
Output Voltage: |
0 - 2.5 Volts peak to peak |
Intensity (adj.): |
0-66 mA |
Power Supply: |
4 AA Batteries
Optional Medical Grade wall adaptor |
| |
Output parameters are across
a 500 ohm resistance. |
|