IMPULSE TENS D5
THE NEW GENERATION OF ELECTRO-THERAPY DEVICES
BioMedical Life Systems
www.bmls.com
Overview
BioMedical Life Systems is proud to introduce
its new generation in Electro-Therapy Devices, the Impulse® TENS D5 Digital
TENS Device. The new look of the device incorporates a “Clam Shape” design
that when closed, covers the LCD Screen and Control Buttons.
The inside flip top cover includes an instruction diagram to guide the user through
five modes of operation; constant, width modulation, rate modulation and two
different types of burst. A timer allows the patient to use the device for a
specified period of time and a low battery indicator light illuminates when the
AA batteries need to be changed. If the device is not correctly attached to the
patient, the amplitude does not increase.
General Specifications
Size: |
4.2" x 2.9" x 1.4" (10.7cm
x 7.4cm x 4cm) |
Weight: |
3.35 oz (94.97 grams) |
Power Source: |
2 AA batteries |
Channels: |
Dual |
Waveform: |
Symmetrical, biphasic square wave |
Pulse Rate (Hz): |
1 120 Hz (Hertz or pps) adj. |
Pulse Width (µS): |
25 250 miscroseconds (µS) adjustable |
Output: |
Constant current |
Constant: |
Conitnuous stimulation. Pulse rate/Pulse Width are
adjustable |
Pulse Rate Modulation: |
Pulse Rate modulates from 100Hz dow to 20Hz over
a 15 second cycle (7.5 seconds down, 7.5 seconds up). Pulse Width is adjustable. |
Pulse Width Modulation: |
Pulse width modulates from 125-250µS and back
down over a 5 second cycle (2.5 seconds down, 2.5 seconds up). Pulse Rate is
adjustable. |
Burst I: |
One second ON. One second OFF. Pulse Rate and Pulse
Width are adjustable. |
Burst II: |
Seven Pulses per burst, 2 bursts per second. Pulse
Width is adjustable |
Output: |
Constant current |
Intensity: |
Continuously adjustable from 0-100 mA peak to peak |
Output Voltage: |
Continuously adjustable from 0-50 V peak to peak |
Tolerances: |
+/-1% |
|
Data recorded across a 500 ohm load resistance.
|
|