BIOSTIM M7
TENS UNIT
BioMedical Life Systems
www.bmls.com
Overview
BioMedical Life Systems Inc., Digital, BioStim® M7 TENS
Device has seven programmable functions; Continuous, Width Modulation, Rate Modulation,
Rate and Width Modulation, SD1, SD2 and Cycled Burst. The device has a Patient
Lock System that, when activated prevents the patient from changing any of the
set parameters. When the Patient Lock Systems is turned off, a Patient Compliance
Meter is displayed showing how long the device was used. A timer allows the patient
to use the device for a specified period of time. The two-channel device incorporates
touch proof design and is run by two AA Batteries.
General Specifications
Size: |
3.25” x 2.25” x 1 5/8” (82 mm x 70mm x 45mm) |
Weight: |
8 oz (266 grams) |
Channels: |
Dual |
Waveform: |
Asymmetrical rectangular biphasic (TENS) |
Pulse Rate (adj.): |
1- 200 Hz |
Pulse Width (adj.): |
10 - 250 µs |
Stimulation Modes: |
|
Continuous: |
Constant Stimulation |
Rate Modulation: |
50% decrease/increase of set value over a 5 second cycle |
Width Modulation: |
50% decrease/increase of set value over a 5 second cycle |
Rate/Width Modulation: |
50% decrease in set value over a five second period.
As rate increases, width decreases. |
SD1: |
Increase of set pulse width 40%, decrease of set pulse rate 45%
and decrease of amplitude 10% over a 3 second period. Values return to original
settings over the next 3 seconds. |
SD2: |
Increase of set pulse width 60%, decrease of set pulse rate 90%
and decrease of amplitude 13% over a 6 second period. Values return to original
settings over the next 6 seconds. |
Cycled Burst: |
2.5 seconds on. 2.5 seconds off. Adjustable Rate and Width. |
Output Voltage: |
49 Volts peak to peak |
Intensity (adj.): |
0-98 mA |
Power Supply: |
2 AA Batteries |
| |
Data was recorded across a
500 ohm resistance load. |
|