BIOSTIM® INF
INTERFERENTIAL DEVICE
BioMedical Life Systems
www.bmls.com
Overview
BioMedical Life Systems, Inc. is proud to announce the newest
generation in its Interferential Device line, the digital BioStim®
INF. Three pre-programmed sweeps; 1-10 Hz, used for Edema Reduction, 80-150 Hz
used for Pain Relief and 1-150 Hz for total treatment allow for easy set up and
patient instruction. The Device offers bipolar stimulation using two electrodes
where the interferential stimulation is already "mixed" or Full Interferential
stimulation with the use of four electrodes. The device has a timer for the desired
treatment time and operates from four AA batteries or the BioStim® Wall Adaptor.
General Specifications
Size: |
3.25" x 2.25" x 1 5/8"
(82 mm x 70 mm x 45mm) |
Weight: |
8 oz (226 grams) |
Carrier Frequency: |
4000 Hz, fixed |
Interference Frequency: |
4001-4150 Hz, adjustable |
Difference Frequency: |
1-150 beats per second, adjustable |
Bipolar Stimulation: |
Channel 1 |
Output Current: |
0-66 milliamps peak to peak with 500 ohm load |
Output Voltage: |
0-33 Volts peak to peak with 500 ohm load |
Waveform: |
Pulsed Sine Wave |
Pulse Width: |
125 microseconds for each phase |
Max. Charge per Cycle: |
12.5 microcoulombs |
Power Supply: |
4 AA (L00083) batteries or Medical Grade Wall Adaptor |
Low Battery Indicator: |
Indicates when batteries are low |
Four Frequency Shifts: |
Continuous, 1-10 Hz over 6 seconds and 80-150 Hz over 8 seconds
and 1-150 Hz over 10 seconds. |
Tolerance: |
+/-1% |
| |
Output parameters are across
a 500 ohm resistance. |
|