|
|
Overview |
BioMedical Life Systems Inc., Digital, BioStim® M7
TENS Device has seven programmable functions; Continuous, Width Modulation, Rate
Modulation, Rate and Width Modulation, SD1, SD2 and Cycled Burst. The device
has a Patient Lock System that, when activated prevents the patient from changing
any of the set parameters. When the Patient Lock Systems is turned off, a Patient
Compliance Meter is displayed showing how long the device was used. A timer allows
the patient to use the device for a specified period of time. The two-channel
device incorporates touch proof design and is run by two AA Batteries.
|
|
|
General Specifications |
| Size: |
3.25” x 2.25” x 1 5/8” (82 mm x 70mm x 45mm) |
| Weight: |
8 oz (266 grams) |
| Channels: |
Dual |
| Waveform: |
Asymmetrical rectangular biphasic (TENS) |
| Pulse Rate (adj.): |
1- 200 Hz |
| Pulse Width (adj.): |
10 - 250 µs |
| Stimulation Modes: |
|
| Continuous: |
Constant Stimulation |
| Rate Modulation: |
50% decrease/increase of set value over a 5 second cycle |
| Width Modulation: |
50% decrease/increase of set value over a 5 second cycle |
| Rate/Width Modulation: |
50% decrease in set value over a five second period.
As rate increases, width decreases. |
| SD1: |
Increase of set pulse width 40%, decrease of set pulse rate 45%
and decrease of amplitude 10% over a 3 second period. Values return to original
settings over the next 3 seconds. |
| SD2: |
Increase of set pulse width 60%, decrease of set pulse rate 90%
and decrease of amplitude 13% over a 6 second period. Values return to original
settings over the next 6 seconds. |
| Cycled Burst: |
2.5 seconds on. 2.5 seconds off. Adjustable Rate and Width. |
| Output Voltage: |
49 Volts peak to peak |
| Intensity (adj.): |
0-98 mA |
| Power Supply: |
2 AA Batteries |
|
Data was recorded across a 500 ohm resistance load.
