BioMed®2000XL and
BioMed®2000XT w/Timer
THE NEW GENERATION OF ELECTRO-THERAPY DEVICES
Overview |
|
| BioMedical Life Systems is proud to introduce
the new generation of the Company’s popular BioMed® 2000 analog TENS device,
the BioMed® 2000 XL and BioMed® 2000 XT with Timer. The new ergonomically designed device has the same parameters as its predecessor; adjustable pulse rate and pulse width, and has three modes of operation; constant, width modulation, and burst. The new design of the device incorporates a sliding amplitude control cover for safety, and a permanently attached 9 volt battery cover to prevent loss. The 9 volt battery compartment has been redesigned for simple insertion and removal of the battery. To provide comfort while wearing, the belt clip has been positioned horizontally.  |
General Specifications of BioMed® 2000 XL |
||
| Dimensions: | 3.9" x 2.75" x 1" (99mm x 70mm x 25mm) | |
| Weight: | 4.6 oz (132 g) | |
| Power Source: | 9V Battery, E-block, type 6F22 | |
| Channels: | Dual | |
| Waveform: | Asymmetrical, biphasic square-wave | |
| Frequency: | 2-150 Hz (Hertz or pps) | |
| Impulse Width: | 50 - 250 microseconds (µs) adjustable | |
| Output: | Constant Current | |
| Continuous: | Continuous stimulation | |
| Burst: | 8 pulses per burst/2 bursts per second | |
| Modulation: | Decrease/increase of set width of 50% over a five-second period | |
| Number of electrodes/Leadwires | 4 | |
| Tolerances: | +/- 10% | |
General Specifications of BioMed® 2000 XT with Timer |
||
| Dimensions: | 3.9" x 2.75" x 1" (99mm x 70mm x 25mm) | |
| Weight: | 4.6 oz (132 g) | |
| Power Source: | 9V Battery, E-block, type 6F22 | |
| Channels: | Dual | |
| Waveform: | Asymmetrical, biphasic square-wave | |
| Frequency: | 2-150 Hz (Hertz or pps) | |
| Impulse Width: | 50 - 250 microseconds (µs) adjustable | |
| Output: | Constant Current | |
| Continuous: | Continuous stimulation | |
| Burst: | 8 pulses per burst/2 bursts per second | |
| Modulation: | Decrease/increase of set width of 50% over a five-second period | |
| Number of electrodes/Leadwires | 4 | |
| Tolerances: | +/- 10% | |
| Timer: | Continuous, 15, 30, 60 | |
Data recorded across a 500 ohm load resistance.